Quenching Oil 50

Quenching Oil 50 (Parks 50 Alternative)

0 out of 5
( There are no reviews yet. )

£57.00 – £480.00

Quenching Oil 50 (Parks #50 Alternative) is very low viscosity quenching oil that approaches water in quenching speed, yet gives a more uniform, less severe quench than water. Recommended for open quenching system operating below 120°F.

SKU: Q50 Categories: , ,
Clear

Description

Quenching Oil 50 AAA (Parks 50 Alternative) is very low viscosity quenching oil that approaches water in quenching speed, yet gives a more uniform, less severe quench than water. Recommended for open quenching system operating below 120°F.  

Very popular with knife makers.

Quenching Oil 50 (Parks 50 Alternative) Benefits

  • BEST VISCOSITY FOR CONTROLLED QUICK QUENCHING WHEN WATER/BRINE IS LEADING TO WARPING AND CRACKING.
  • PARKS 50 QUENCH AAA ALTERNATIVE
  • DELIVERED TO YOUR DOOR VIA UPS
  • SUITABLE FOR CIRCULATORY SYSTEMS AS WELL AS DROP QUENCHING
  • IF YOU PREFER A SLOWER QUENCH PLEASE SEE OUR QUENCHING OIL 32. YOU CAN USE QUENCHING OIL 32 AS A GENERAL PURPOSE QUENCH POPULARLY USED FOR O1 TOOL STEEL.

QUENCHING OIL 50 PRODUCT DATA SHEET

QUENCHING OIL 50 SAFETY DATA SHEET

Frequently asked Questions About Quenching Oil
What is a quenching oil?
Quench oil serves two primary functions. The first is that it helps with hardening of steel by controlling heat transfer during quenching. The second is that it enhances wetting of steel during quenching. The second is to minimize the formation of undesirable thermal and transformational gradients, these may lead to increased distortion and cracking.
How do you harden steel at home?
Medium carbon steel may become slightly tougher, although it cannot be hardened to the point where it cannot be filed or cut with a hacksaw. You can heat steel until it glows red, before it is then quenched in clean water immediately, it becomes very hard but also brittle. Rye Oil Ltds Quenching oil controls the quench stopping it from becoming brittle.
What is quenching process?
You can use this oil for Quench hardening which is a process in which steel and cast iron alloys are strengthened and hardened. These metals consist of ferrous metals and alloys. This is done by heating the material to a certain temperature, depending on the material.

If you have any questions about this or any other product please contact us on 01797 223374 or email graham@ryeoil.co.uk.

 

 

 

Additional information

SIze

20ltrs, 25ltrs, 205ltrs

Reviews

There are no reviews yet.

Be the first to review “Quenching Oil 50 (Parks 50 Alternative)”