Exocet Aga Additive 200ML
Lowers char value
Reduces build up of carbon deposits and soot
Inhibits growth of deposits in fuel storage tanks
Reduces operating problems
One 200ml bottle of Exocet aga additive treats 1,000 litres of fuel.
There has been a significant increase in vaporising boiler field problems during the past couple of years and many are wondering if the kerosene quality has changed slightly due to the introduction of 1000wppm sulphur.
Exocet Aga Additve Information
We developed XO1482TA to include chemistry used in refineries to treat less stable blend streams and finished fuels. Customers using this product have told us that they have seen a marked reduction in their operating problems and an increasing number of cooker range owners now use Exocet cooker additive in all of their kerosene.
Although the Char Value of domestic kerosene (BS2869:C2) has an upper limit of 20mg/kg, field experience since 2008 indicates that for numerous reasons fuel is actually being supplied with Char Values in the range 16-30mg/kg. The situation is not improving and is having a serious negative impact on the performance of range cookers (e.g. AGAs, Rayburns, Waterford-Stanleys, etc), where carbon build-up around the burner is now commonplace. This results is variable heat output and poor introllability. Exocet Aga Additive acts to reduce the Char Value of the fuel, improving its combustion performance and maintaining a clean burner for long.
We do supply an alternative is you have any problems with Exocet called Topanol
5.0 out of 5 stars Just What We Needed
By Buster on 6 Sept. 2015
Excellent! Made all the difference to our old drip-feed oil range. Just did annual clean of range and it had very lttle soot. Will buy again.
5.0 out of 5 stars Five Stars
By Pat Smith on 1 Nov. 2015
Excellent product and speedy service from seller.
5.0 out of 5 stars RYE OIL – QUALITY SERVICE
By PETER D LAWLER on 18 May 2016
Rye Oil offered a good price and their service was excellent. I would definitely highly recommend them. Nice staff as well !
5.0 out of 5 stars Great stuff once I’d got all fo the water out of the Tank that cause the pump to fail
By kevin podmore on 12 Oct. 2015
This definitely worked for me. One thing I would say is that if you pump has failed then get the tank checked for water first. This stuff will do its job but as the water sinks to the bottom of the tank this will still get dragged through first even if you have the additive in.