Cedar Cladding Oil / Decking Oil
Two uses, same product.
- Good solvency properties with high oxidation stability.
- Otherwise used as a Decking Oil.
- DMSO extract according to IP 346 (Polynuclear Aromates) less than 3.0 %.
- To treat cedar cladding to extend its life and protect the colour.
- The product is a light tan colour when in the can which will apply and dry clear matt.
- Excellent UV Protection.
- No pealing, flaking or blistering.
- Dirt resistant.
- Help reduce algae and fungi attacking the wood.
- Will bring out the grain and give the wood a wet look.
- Great decking oil.
Cedar Cladding Oil/ Decking Oil penetrates deeply into timber surfaces and, in a similar way to bark, attaches to the wood capillaries providing protection against extreme climate conditions. This product is designed for use on softwood timbers. Cedar, Larch, Pine and lots more. It is not suitable for timbers which contain tannin’s, such as oak. Cedar Cladding Oil is the ideal finish for cladding, doors, windows and other exterior joinery.
This cedar treatment prolongs the life of the wood keeping the wood supple. Our treatment will stop stopping cracking, splitting and discolouring. Cedar Treat 22 is a clear dry product that wont effect the original colour of the wood.
Application of Cedar Cladding Oil
While one coat should do the job, it does depend on the porosity and age of the wood. Application can be hand bushed, sprayed or dipped. If the wood has already been varnished or waxed the treatment won’t work, however, it is fine to be used on pressure treated timber.
Rye Oil Ltd suggests that for best results reapplication should take place every 3-4 years.
This treatment is also used as a hard wearing pine decking oil.
The reason for the introduction of the product is to replace its predecessor Texnap 22 in 25 litre cans.
If you have any questions about the Cedar Cladding Oil Treatment please contact us here
Coverage is 4.5 Square Meters per litre.
Multi Use with great results
I bought this oil to spray on a newly built Thermowood Clad Workshop. The oil is very easy to apply and has given the workshop a fantastic finish which has been commented on by many passers by. After a conversation with Rye Oils man John I have now used this on my Outdoor Wooden Furniture as well as my Decking and Pergola, again with excellent results. This oil is easy to use, very economical with great coverage and above all an excellent finish. Verified purchase.
Forget normal deck oil.
I was skeptical in the beginning after using a well known oil for many years. Thought I would give it a go and WOW! Their is not much on the internet if you are looking for reviews but please take from me this product is just the same and better than the normal shop brands. I used on a typical pine deck and the colour is similar if the deck has been rained on. The oil seems very similar to danish oil but does not leave a yellow tinge. Highly recommend! Verified purchase.
18 fence panels and rail fence
I Used this product for 18 close board fence panels (one side) rail sleepers, rail fence and field gate. I used a sprayer and also brushed in. It Worked really well leaving all timber a really nice colour and well protected. Can’t recommend this product enough will be buying another 25l next year to re-treat. Verified purchase.
20 Jul, 20171294.practice_nurse,
This oil was recommend by a friend I have to say I was not disappointed . It goes on very well and really shows up the grain of the wood on our decking. The decking is looking nice and shiny but non slip. We have ordered another 25 litres as the wood really soaks it up, we have applied three coats but going to apply another coat. Would I recommend this product? yes I would, have passed the name on to a lot of friends . Verified purchase.