EXCELFLUID EVO GP

Excelfluid EVO GP a multi-functional formaldehyde free, low oil semi-synthetic metal process fluid which produces a
transparent emulsion when diluted in water. This product is a true rationalisation product and will perform most
applications on a wide range of materials.

Excelfluid EVO GP incorporates the latest non-staining performance additives to ensure complete multi-metal
compatibility. This product is based upon synthetic and natural esters to provide excellent machining
performance across a wide range of applications.

Excelfluid GP does not rely on traditional anti-foams for foam control. The emulsion when in use produces 50% less
foam compared to similar emulsion types with a 50% repeatable rapid increase in foam collapse. To be used in both
soft and hard water conditions from 0 – 750ppm

Features & Benefits:

Ultra-low foaming technology  Diluent water from 0ppm – 750ppm
Free from Formaldehyde release biocides  Environmentally respectful
DCHA and Secondary Amine free  Multi-metal compatibility
Excellent corrosion protection  Cost effective

Typical Test Data:

Appearance Amber liquid.
Emulsion Type Translucent.
Foaming Tendency.
5% emulsion in 50ppm water Nil foam after 5 seconds.
Specific Gravity at 20oC 1.006 typical.
pH @ 5% 9.6 typical.
Refractometer Correction Factor 1.6.
IP 287 Corrosion Break Point, % Volume: 2.0.
IP 125 Corrosion at 2% 0/0-0.
Reichert Lubricity Characteristics at 10% dilution.
Load bearing Capacity (Kg/mm2) 1.31.
Noise Reduction (metres) 29.
Oil Content 25%.